Service manual

321
SEP 2006
Ver. 1.1
DP-8020E/8020P/8016P
7.3. Installation Procedure
Note:
1. Refer to each individual Installation Instructions when installing other Options.
2. The following machine illustrations, depict a DP-8020E with a standard configuration.
3. The scanner is locked in place with a Shipping Screw (Blue) to prevent damage during transit.
Do Not turn the Power Switch ON before unlocking the scanner.
4. The machine is shipped from the factory with the Pressure Roller locked in the opened position to
avoid the possibility of damaging the Pressure Roller.
Do Not turn the Power Switch ON before unlocking the Pressure Roller.
7.3.1. Installation Procedure
<Unlocking the Scanner>
(1) Remove the Protective tape from the Battery.
(2) Remove the Tape.
(3) Remove 1 Blue Screw.
(4) Store the Blue Screw into the space provided in
the 1st Paper Tray.
<Unlocking the Pressure Roller>
(5) Open the Left Cover.
(6) Remove 2 Tapes.
(7) Remove 2 Blue Screws.