Service manual

338
SEP 2006
Ver. 1.1
DP-8020E/8020P/8016P
(3) Install the Hardware Key into one of the three
available connectors (CN67) on the SC PC
Board.
Note:
The connector is keyed, to prevent damage to the
SC PC Board, install the Hardware Key as
illustrated. Do not force the Hardware Key into the
connector if facing the wrong way.
(4) Proceed with the installation of other options.
If finished, reinstall all Harnesses and Covers.
(5) Plug the AC Power Cord and turn the Power
Switch on the Right Side of the machine to the
ON position.
(6) Reconnect the Telephone Line Cable if it was
disconnected.
(7) Update the firmware of the unit to the PS/PCL
Option firmware. Refer to the attached "Service
Notes".
(8) Install the PS/PCL6 Software into the PC with
the Operating Instructions by following the
prompts of the Installation Wizard.
(9) Attach the Adobe PostScript 3 Label to the Front
Cover as illustrated.