Service manual

366
SEP 2006
Ver. 1.1
DP-8020E/8020P/8016P
8.10. Installing the Accounting Software (DA-WA10)
8.10.1. Contents
8.10.2. Installation
1. Before installing this option, make sure the Hard Disk Drive Unit (DA-HD18) is installed into
the machine first. Refer to the Installation Instructions for the Hard Disk Drive Unit (DA-HD18).
2. Install the Accounting Software into the PC with the Operating Instructions by following the
prompts of the Installation Wizard.
3. Set the Key/Dept. Counter function by following the steps below.
1) Press "FUNCTION", "ORIGINAL SIZE", and then "3" keys sequentially to enter the Service
Mode.
2) Press the "5" key to enter the F5 Service Mode (Function Parameters).
3) Press the "START" key.
4) Press the "4", "2", and then "SET" keys sequentially to enter the F5-42 "KEY/DEPT.
COUNTER".
5) Press the "2", and then "SET" keys to activate the Key/Dept. Counter function.
6) Press the "STOP" key.
Note:
The factory default setting for the Key Operator ID Code is "000", to ensure security it is
recommended to change this code.
Follow the steps below to change the Key Operator ID Code:
• While in the Service Mode, press "7" to enter the F7 Service Mode.
• Press the "START" key to select "01 KEY OPERATOR ID CODE".
• Press the "SET" key, and then input a new 3-digit ID Code.
• Press the "SET" key, and then press "STOP" key to exit F7 Service Mode.
7) Press "FUNCTION", and "CLEAR" keys simultaneously to exit the Service Mode.
4. Set the Key/Dept. Code by following the steps below.
1) Press the "FUNCTION" key, and then select "V" or " " arrow buttons to select "GENERAL
SETTINGS", and press "SET" key.
2) Select "V" or " " arrow buttons to select "09 KEY OPERATOR MODE", and then input the
3-Digit Code, and press "SET" key to enter the Key Operator Mode.
3) Select "V" or " " arrow buttons to select "13 DEPT. COUNTER MODE".
4) Press "2", and then select "SET" keys.
5) Select "V" or " " arrow buttons to set the Dept. Counter Codes (up to 300).
6) Press the "STOP
" key to return to the standby mode.
Qty. Description Remarks
1 Accounting Software CD Includes Operating Instructions
1 Installation Instructions This document