Service manual

412
SEP 2006
Ver. 1.1
DP-8020E/8020P/8016P
8.18. Installing the Key Counter Harness Kit (DA-KH180)
8.18.1. Contents
Note:
The Key Counter is sold separately.
Note:
1. The part number(s) may differ depending on the Destination.
2. Refer to the Parts List in the Parts Manual.
8.18.2. Installation
CAUTION!
Turn the Power Switch on the Right Side of the machine to the OFF position, and then
unplug the AC Power Cord before beginning installation. (During a Lightning Storm, to
prevent electrocution disconnect the Telephone Line Cable first before unplugging the
AC Power Cord, if the Fax Option is installed.)
Qty. Description Part No. Remarks
1 KEY Harness DZFP001902
1 Counter Guide DZJB000463
1 Key Counter Base PJUIC0218Z
1 Key Counter Cover PJUIC0219Z
1 Key Counter Front Cover PJUIC0221Z
3 Clamp DZJK000070
6 Screw XTB3+6FFJ-RP
2 Screw XTW3+6LFJ
2 Screw XSB4+10FJ
1 Installation Instructions DZSM000825 This document
(1) Remove 10 Screws.
(2) Remove the Rear Cover.
(3) Open the Left Cover.
(4) Remove 2 Silver Screws.
(5) Remove the Left Scanner Cover.
(6) Remove 2 Shoulder Silver Screws.
(7) Remove the Right Scanner Cover.
(8) Remove 2 Silver Screws.
(9) Remove the Rear Scanner Cover.