Service manual

Network Firmware Update Tool (LAN)
Page 2
Table of Contents
1. General 3
1.1 Supporting OS.......................................................................................................................................... 3
1.2 Supporting Panasonic Fax/Copier Models............................................................................................... 3
2. Installation 4
2.1 Installing the Network Firmware Update Tool .......................................................................................... 4
2.2 Setting up the Network Firmware Update Tool ........................................................................................ 4
2.3 Uninstalling the Network Firmware Update Tool...................................................................................... 5
3. Preparing the Firmware Update 6
3.1 Preparing the Unit to Accept the Firmware Code..................................................................................... 6
3.1.1 For DX-600 / DX-800 (v1.31 or higher) 6
3.1.2 For other models 6
3.2 Preparing the Firmware Code .................................................................................................................. 6
4. Using the Network Firmware Update Tool 7
1st Edition : 2002 March 20
2nd Edition : 2002 August 1
3rd Edition : 2002 December 5
4th Edition : 2003 April 10
5th Edition : 2003 April 22
6th Edition : 2003 December 18
7th Edition : 2004 April 7
8th Edition : 2004 August 3
9th Edition : 2004 August 20
10th Edition : 2004 October 22
11th Edition : 2005 March 18
12th Edition : 2006 March 27
13th Edition :
2006 Maｙ 08
14th Edition : 2006 June 26
Windows and Windows NT are registered trademark of
Microsoft Corporation in the United States and/or other countries.
Copyright © 1999 - 2006 Panasonic Communications Co., Ltd.
All rights reserved. Unauthorized copying and distribution is a violation of law.
The contents of these Operating Instructions are subject to change without notice.