Service manual

68
SEP 2006
Ver. 1.1
DP-8020E/8020P/8016P
2.2.5. Process Unit
Note:
To avoid Toner spill in the machine, follow the steps below before removing the Process Unit.
1. Press "FUNCTION", and "1 SIDED COPY" keys simultaneously.
2. The LCD shows “Please wait...” for approx. 5 sec. Then it will be ready.
(1) Open the Left Cover.
(2) Open the Front Cover.
(3) Remove the Toner Waste Container (1201).
(4) Remove the Toner Bottle.
Caution:
Do Not install the Toner Bottle before installing
the Process Unit first. If the Toner Bottle is
installed, and turned to the "Locked" position
without the Process Unit installed, the Toner will
spill inside the machine.
<Cleaning Charge Wire>
Slide the Corona Cleaner in, and out 3, or 4 times
slowly, then return the Cleaning Lever Handle to
original position.