Installation manual
11
Change Over M Ext monitors mains and emergency power inputs and gives fault indi-
cation if either supply is lost. The power input status is indicated by the front panel LEDs.
Change Over M Ext provides two separate controllable 230 VAC outputs, OUT 3 and
4, protected by separate front mounted fuses. There are also two separate programma-
ble change over relays, OUT 5 and 6. OUT 3-6 are used to control units such as sirens,
magnets, ashlights, alarms and ventilation fans. For details on assembling a system and
denitions of common system terms, refer to the Installation Manual.
5100068-01A
Change Over M EXT H
PSU M AC/DC 5A powers the system. It is short-circuit proof and can be used in pairs
to supply 5+5 A. For details on assembling a system and denitions of common system
terms, refer to the Installation Manual.
5100087-01A
PSU M AC/DC 5A
The Dimension CD-Series offer DIN-rail DC/DC converters in the 92-120W output
power range in a very compact housing. These DC/DC converters are allowed to run
with a battery or similar sources or can also be used to refresh and stabilize the 24Vdc
on the end of long cable runs. The basic units include all the essential basic functions
while the -S1 version is equipped with quick connect spring clamp terminals, a DC-OK-
contact which monitors the output and an input-low-relay-contact. The –L1 version ad-
ditionally fulls the NEC Class 2 requirements. All devices except the CD5.241-L1 have
a PowerBoost of 20% incorporated. This extra power can even be used continuously up
to +45°C.
5100088-01A
PSU M DC/DC 5A
The Control/Repeater Panel M 4.3 is a control panel with a 4.3” graphical colour display
used to manage and supervise a system. It mounts on any at surface independently
from a re alarm cabinet and is equipped with communication buses for connecting
to the system. USB In front of the panel provides easy access to the system’s data and
diagnostic logs. It also provides the following features:
• A backlit 4.3” graphical colour display • Alarm buzzer
• LED status indicators • Backbone Bus Interface
• Ethernet connection • RS-422/RS-485 serial interface
• RS-232/RS-485 serial interface • Three USB interfaces
• Two congurable powered I/Os • Two programmable relay outputs
5101003-50A
Control/Repeater M 4,3 Cruise
Salwico Fire Detection System