Installation manual
12
The Control/Repeater Panel M 4.3 is a control panel with a 4.3” graphical colour display
used to manage and supervise a system. It mounts on any at surface independently
from a re alarm cabinet and is equipped with communication buses for connecting
to the system. USB In front of the panel provides easy access to the system’s data and
diagnostic logs. It also provides the following features:
• A backlit 4.3” graphical colour display • Alarm buzzer
• LED status indicators • Backbone Bus Interface
• Ethernet connection • RS-422/RS-485 serial interface
• RS-232/RS-485 serial interface • Three USB interfaces
• Two congurable powered I/Os • Two programmable relay outputs
5100096-20A
Repeater M 4,3
Salwico Workboat AI is an analogue addressable re detection system with 2 re detec-
tor loops SOLAS compliant. Tested and certied by all major classication societies, this
system provides an optimal re detection solution for smaller vessels.
The system is managed and supervised through Control Panel M 4.3. The Control Panel
M 4.3 is mounted on the front of the re alarm cabinet.
Salwico Workboat Fire Detection Centrals
Salwico Workboat AI
Salwico Fire Detection System
5102002-01A
Salwico Workboat AE is an analogue addressable re detection system with 2 re de-
tector loops SOLAS compliant. Tested and certied by all major classication societies,
this system provides an optimal re detection solution for smaller vessels.
The system is managed and supervised through Control Panel M 4.3. The Control Panel
M 4.3 is mounted separately from the re alarm cabinet.
Salwico Workboat AE
Salwico Workboat CI is a conventional re detection system with 8 re detector sec-
tions SOLAS compliant. Tested and certied by all major classication societies, this
system provides an optimal re detection solution for smaller vessels.
The system is managed and supervised through Control Panel M 4.3. The Control Panel
M 4.3 is mounted on the front of the re alarm cabinet.
Salwico Workboat CI
5102013-01A
5102002-02A