Installation manual

14
The ML280 elite is a fast and robust log-printer. It can be connected to all Salwico
re and gas alarm systems that has a RS232 printer output. aper can be fed from the
bottom, from the behind or from the top. Single sheet paper or continuous paper can
be used. The cable connections are on the back of the printer. The robust construction
makes the ML280 elite suitable for harsh environments
7680
OKI ML280
SE3000+ is a small hand hold test device for Salwico Fire Alarm Systems. It can be used
to execute two different tests, a loop test and a loop unit test. The loop test automati-
cally boots the complete loop and searches all addresses on the loop. All the informa-
tion found about the addresses is saved in a list, which can be printed out or scrolled
through on the display. The loop unit test searches for the manually requested address
and immediately displays all information found about the unit. More information about
SE3000+ can be found in the manual SE3000+ User Guide (part no 046481) and in
the Short Guide printed on the bottom of the device.
047480
SE3000+ Loop test unit
Loop installation unit
Central Unit Accessories
Log Printer
The mini printer is an embedded printer to the re detection central and very silent
through direct thermal printing method. The printer has an abundant gure/curves/char-
acters print function and a copy function of LCD screen.
5200087-00A
Mini printer
Salwico Fire Detection System