Installation manual

16
Salwico EV-DPH-A2R is an analogue addressable smoke and heat detector with a dual
wavelength optical chamber. Two light sources with different wavelengths are used,
giving the detector a stable reaction to different kinds of smoke and making it insensi-
tive to unwanted alarms caused by e.g. water steam. Salwico EV-DPH-A2R is equipped
with Omniview™ 360° LED indicator giving a clear, full 360° visibility of the red alarm
indication. The technical detector address is set with a special programming tool. Valid
addresses are 1-254. Salwico EV-DPH-A2R is equipped with an output for remote
indication.
40050
EV-DPH-A2R
Salwico EV-H is an analogue addressable heat detector. Salwico EV-H is designed to
give early warning for he presence of heat in the supervised area, and is available in two
temperature classes: A1R (xed 54°C + rate of rise 0.8°C/min) and CS (xed 84°C),
see separate part no. for 84°C.Salwico EV-H is equipped with OMNIVIEW 360° LED
indicator giving a clear, full 360° visibility of the red alarm indication. The detector can
be placed in harsh environments if it is mounted on a splash proof base.The techni-
cal detector address is set with a special programming tool, valid addresses are 1-254.
Salwico EV-H is equipped with an output for remote indication. For detailed information
about appropriate systems for the detector, see separate document “Compatibility of
Loop Units/System”.
040000
EV-H/A1R 54°C Analogue Addressable Heat
Salwico EV-H is an analogue addressable heat detector moulded together with base
adapter SPB-ADAPT to full IP67. Salwico EV-H is designed to give early warning for
the presence of heat in the supervised area, and is available in two temperature classes:
A1R (xed 54°C + rate of rise 0.8°C/min) and CS (xed 84°C), see separate part no.
for 84°C. Salwico EV-H is equipped with OMNIVIEW 360° LED indicator giving a clear,
full 360° visibility of the red alarm indication. The detector can be placed in harsh envi-
ronments if it is mounted on a splash proof base. The technical detector address is set
with a special programming tool, valid addresses are 1-254. Salwico EV-H is equipped
with an output for remote indication. For detailed information about appropriate sys-
tems for the detector, see separate document “Compatibility of Loop Units/System”.
40001
EV-H A1R 54ºC IP67
Salwico EV-PH is an analogue addressable combined optical smoke and heat detector.
It is designed to give early warning for the presence of heat and smoke in the super-
vised area. Both heat and smoke alarm can be generated individually. At the same time
Salwico EV-PH offers a high protection against unwanted alarms. Salwico EV-PH is
equipped with OMNIVIEW 360° LED indicator giving a clear, full 360° visibility of the
red alarm indication. The detector can be placed in harsh environments if it is mounted
on a splash proof base. The technical detector address is set with a special program-
ming tool, valid addresses are 1-254. Salwico EV-PH has a ne pitch net which improves
the response to smoke and also reduces the amount of dust etc. entering the detector.
Salwico EV-PH is equipped with an output for remote indication.
040030
EV-PH Analogue Addressable Optical Dual Smoke/Heat Detector
for dry space IP22
Salwico Fire Detection System