Installation manual
17
Salwico Fire Detection System
Salwico EV-H is an analogue addressable heat detector. Salwico EV-H is designed to give
early warning for the presence of heat in the supervised area, and is available in two
temperature classes: CS (xed 84°C) and A1R (xed 54°C + rate of rise 0.8°C/min),
see separate part no. for 54°C. Salwico EV-H is equipped with OMNIVIEW 360° LED
indicator giving a clear, full 360° visibility of the red alarm indication. The detector can
be placed in harsh environments if it is mounted on a splash proof base. The techni-
cal detector address is set with a special programming tool, valid addresses are 1-254.
Salwico EV-H is equipped with an output for remote indication. For detailed information
about appropriate systems for the detector, see separate document “Compatibility of
Loop Units/System”.
040005
EV-H/CS 84°C Analogue Addressable Heat
Salwico EV-H is an analogue addressable heat detector moulded together with base
adapter SPB-ADAPT to full IP67. Salwico EV-H is designed to give early warning for
the presence of heat in the supervised area, and is available in two temperature classes:
CS (xed 84°C) and A1R (xed 54°C + rate of rise 0.8°C/min), see separate part no.
for 54°C. Salwico EV-H is equipped with OMNIVIEW 360° LED indicator giving a clear,
full 360° visibility of the red alarm indication. The detector can be placed in harsh envi-
ronments if it is mounted on a splash proof base. The technical detector address is set
with a special programming tool, valid addresses are 1-254. Salwico EV-H is equipped
with an output for remote indication. For detailed information about appropriate sys-
tems for the detector, see separate document “Compatibility of Loop Units/System”.
40006
EV-H CS 84ºC IP67
Salwico EV-H is an analogue addressable heat detector molded together with base
adapter SPB-ADAPT SCI to fulll IP67 ingress protection class. Salwico EV-H is designed
to give early warning for the presence of heat in the supervised area, and is available in
two temperature classes: CS (xed 84°C+ rate of rise function according to EN54-5)
and A1R (xed 54°C ), see separate part no. for 54°C. Salwico EV-H is equippe with
OMNIVIEW 360° LED indicator giving a clear, full 360° visibility of the red alarm
indication. The technical detector address is set with a special programming tool. Valid
addresses are 1-254. Salwico EV-H is equipped with an output for remote indication.
SPB-ADAPT SCI is developed to provide Short Circuit Protection in the detector base.
Short Circuit Isolator function is fully transparent and do not require any setting. Short
Circuit Isolator protects the loop cable from short circuit by breaking positive side of
loop cable.
5100470-00A
EV-H CS 84ºC IP67 SCI
Salwico EV-H is an analogue addressable heat detector molded together with base
adapter SPB-ADAPT SCI to fulll IP67 ingress protection class. Salwico EV-H is designed
to give early warning for the presence of heat in the supervised area, and is available in
two temperature classes: A1R (xed 54°C + rate of rise function according to EN54-
5) and CS (xed 84°C), see separate part no. for 84°C. Salwico EV-H is equipped
with OMNIVIEW 360° LED indicator giving a clear, full 360° visibility of the red alarm
indication. The technical detector address is set with a special programming tool. Valid
addresses are 1-254. Salwico EV-H is equipped with an output for remote indication.
SPB-ADAPT SCI is developed to provide Short Circuit Protection in the detector base.
Short Circuit Isolator function is fully transparent and do not require any setting. Short
Circuit Isolator protects the loop cable from short circuit by breaking positive side of
loop cable.
5100472-00A
EV-H A1R 54ºC IP67 SCI