Installation manual
21
Salwico Fire Detection System
Fire patrol unit in IP22 housing.
5200283-00A
FP10
The IC21 WP is an addressable unit used for control and indication of re doors, re
dampers etc. in a re alarm system. This unit has been designed for use in damp spaces.
IC21 WP can control and supervise both single and double doors. The unit includes two
inputs, one programmable output and one secondary output controlled by an external
switch. The loop address of the IC21 WP is set by a DIP-switch.
5200270-00A
IC21 WP
The EC-H/A2S conventional heat detector belongs to Salwico EC range of detectors.
EC is a range of conventional detectors, which have been produced using the latest in
manufacturing technology and supplied with an array of advanced features. The EC-H/
A2S thermal detector uses a state of the art thermal element combined with an ap-
plication specic integrated circuit (ASIC) to provide quick and accurate detection of
res. The detector incorporates a static element and is suitable where ambient condi-
tions normally exhibit rapid changes in temperature e.g. galley. The EC-H/A2S detector
also has an integral LED, which illuminates to provide a local alarm signal. An optional
remote LED annunciator may be used to repeat any alarm signal.
5200172-00A
EC-H/A2S 58°C CONV HEAT DET, dry space IP22
Conventional Detectors
The IC21 WPL (equipped with an extra large enclosure) is an addressable unit used for
control and indication of re doors, re dampers etc. in a re alarm system. This unit has
been designed for use in damp spaces. IC21 WPL can control and supervise both single
and double doors. The unit includes two inputs, one programmable output and one
secondary output controlled by an external switch. The loop address of the IC21 WPL
is set by a DIP-switch.
5200278-00A
IC21 WPL