Installation manual
26
ACP-IS is an intrinsically safe addressable manual call point for the re alarm systems
CS3000, CS4000 and NSAC-1. ACP-IS is connected to the detector loop via ISOLA-
TOR-A. Up to 20 addressable IS units can be connected to an ISOLATOR-A. Pressing
the glass causing it to crack activates the re alarm. The call point can also be tested
with a special key, included in the delivery. A red LED on the front of the call point
indicates the re alarm. The LED remains lit until the glass has been replaced and the
re alarm has been reset on the control panel. The address of the call point is set with a
DIP-switch. Clean the manual call point by using a damp cloth.
60060-001010
ACP-IS Intrinsically Safe Addressable Manual Call Point
for wet space IP67
NS-AOHS-Exn is an analogue addressable multi sensor detector for Salwico re alarm
systems CS3000*, CS4000 and NSAC-1. It has two separate analogue sensor elements,
one optical for smoke detection and one heat-sensing element for heat detection.
Alarm condition is indicated on the detector via a red LED. The LED is lit until the alarm
has been reset on the control panel. The detector is polarity independent. The address
is set with a DIP switch, which is mounted on the backside of the detector. NS-AOHS-
Exn must not be separated from the base when energized.
N11255
NS-AOHS-Exn Analogue Addressable Dual Optical Smoke
and Heat De-
tector for wet space IP55
Equipment For Hazardeous Areas, Zone 2
ACPWP-Exn is a Manual call point for the addressable re alarm systems CS4000,
NSAC-1 and CS3000 with SPK2000. The selected material PC/ABS and the encapsula-
tion, with ingress protection IP67, make it suitable for very harsh environment. Pressing
the glass causing it to crack activates the re alarm. The call point can also be tested
with a special key, included in the delivery. A red LED on the front of the call point
indicates the re alarm. The LED remains lit until the glass has been replaced and the
re alarm has been reset on the control panel. The address of the call point is set with
a DIP-switch. ACPWP-Exn is polarity independent which simplies the installation. The
apparatus must be located in an area with low risk of mechanical danger.
N11320
NS-ACPWP-Exn Addressable Manual Call Point for wet space IP67
The ACP-IP55-Exn is a manual call point for the addressable re alarm system Salwico
CS4000, CS3000* and NSAC-1.The ingress protection IP55 makes this call point suita-
ble for harsh environments. Pressing the glass causing it to crack activates the re alarm.
A protective plastic coating on the glass prevents operator injury. A red LED is lit on the
call point when the control panel has received the alarm. It will be lit until the glass has
been replaced and the alarm has been reset at the control panel. The address is set with
a DIP-switch mounted inside the call point. The call point is polarity independent. The
apparatus must be located in an area with low risk of mechanical danger.
N11321
NS-ACP-Exn Addressable Manual Call Point for wet space IP55
Salwico Fire Detection System