Installation manual
31
Salwico Fire Detection System
Testire is a multi-stimulus detector tester, suitable for testing of optical/photoelectric
and ionisation smoke detectors and thermal detectors (xed temperature or rateof-
rise). The detectors can be either conventional or analogue addressable. Testire is also a
functional tester that enables testing of multi-detectors or multi-criteria detectors from
a single test unit. Testire creates stimuli that the detectors are designed to detect.
5200112-00A
Testire 1001-101 Multi Detector Tester for both Smoke/Heat
Testire generates its non-toxic smoke stimulus from a specially formulated, uid sup-
plied in a replaceable non pressurised capsule. The number of tests from a capsule is
dictated by the response time of the detectors under test and can range between 500
and 1,000 tests. Although there is much more to the comparison than material cost,
typically this equates to between two and ve times that produced by an aerosol.
5200114-00A
Testire Smoke Capsule 6pcs
Test equipmane accessories
The core element of the Solo range is the telescopic and extension access poles which
are extremely lightweight and quickly extend to provide access to detectors up to 9
metres. • Light - easy to use at height, on-site, day after day • Non-whip • Certied
non-conductive - protecting both the engineer and overhead live equipment from inad-
vertent shorts • Available in one, two or four telescopic sections • Lifetime warranty
N1740, N1741
N1744, 009151
Pole Solo 1,2 mtrs / Pole Solo100 1-6 mtrs stronger than 9151
Pole adapter / Pole 1.4 - 4.0 mtrs
The professional’s choice - the Solo A3 is a clean synthetic aerosol that delivers parti-
cles replicating those found in real smoke to detector. Provided in a 250ml canister it
is designed for use with the Solo 330 and Solo 332 dispenser. • UL & ULC listed •
Detector manufacturer endorsed • Non-ammable • Oil-free formulation • No
lasting residue • Fast activation and clearing time
009153
Test gas bottle, aerosol, 150 ml, for Solo 330