Installation manual

32
6”, red, 230VAC
8”, red, 230VAC
The re alarm bells are suitable for both indoor and outdoor uses since the bells have
aluminium/plastic housings. The operating part of BE12–BE13 is a micro-motor and of
BE14–BE17 a two coil vibrator. All versions have low starting currents and very low
power consumption. If used in harsh environment the waterproof connection box
BE10, IP65, shall be used.
006135
BBX, conn. box, for 6131-34, IP65
The general alarm push button NS-GA2 is designed for use in dry spaces. The NS-GA2
can be wall- or recessed mounted. It is delivered c/w box for wall mounting.
A plastic lid protects it from unintentional activation. NS-GA2 has dual functions:
• Auto: Activates the pre-programmed general alarm pattern. The button will stay ac-
tive until it is pressed again.
• Manual: Activates the audible alarm as long as it is pressed (momentary activation).
N1307
NS-GA2 General Alarm Push Button Auto/Manual for dry space
IP22
General Alarm Devices
The general alarm push button NS-GA2/IP55 is designed for use in harsh environments.
The NS-GA2/IP55 is wall mounted and a plastic lid protects it from unintentional activa-
tion.
NS-GA2/IP55 has dual functions:
• Auto: Activates the pre-programmed general alarm pattern. The button will stay active
until it is pressed again.
• Manual: Activates the audible alarm as long as it is pressed (momentary activation).
NS-GA2/IP55 is delivered c/w two cable glands.
N1308
NS-GA2/IP55 General Alarm Push Button Auto/Manual
for wet space
IP55
Salwico MBA-6 alarm bell is intended for use with all Salwico re alarm systems. The
Salwico MBA-6 has a very high volume output matched with extremely low power
consumption. The specially designed weatherproof bell has an aluminium back box with
a built-in 230Vac to 24 Vdc weatherproof mains pack (BBX-4) that allows the bell to be
powered directly from a mains supply.
The back box is given either single or double treaded for maximum exibility in installa-
tion.
006143
006144
MBA6, alarm bell
Bells
Salwico Fire Detection System