Installation manual

The Control M Gas is a control panel with a 4.3” graphical colour display used to

manage and supervise a gas alarm system. Control M Gas Internal mounts in the gas

alarm cabinet front. Control M Gas Internal is equipped with communication buses for

connecting to the gas alarm system, but it has to be used in connection with module

BusCon M Gas. Features: • A backlit 4.3” graphical colour display • Alarm buzzer

• LED status indicators • Backbone Bus Interface • MODBUS interface

• USB interface (for service & maintenance) • One power output

• One alarm output • One fault output • Three programmable outputs

5110001-00A

Control M Gas Internal

This Gas detection system is a state-of-the-art addressable detection system designed

to meet marine, industrial and transport requirements. Special care is given to ergo-

nomics and user-friendliness with its logical and intuitive operator panel. These standard

centrals are designed for small stationary gas detection installations for the monitoring

of explosive and/or toxic gases. Salwico Gas Detection System is SOLAS compliant and

certied by all major classication societies for marine applications.

Salwico GS5000

GDS I-1A

GDS I-2A

GDS I-3A

GDS I-1A1R

GDS I-2A1R

GDS I-3A1R

GDS I-1A1C

GDS I-2A1C

GDS I-3A1C

GDS I-1A1C1R

GDS I-2A1C1R

GDS I-3A1C1R

Standard Centrals

The Salwico Gas Detection System can also accommondate larger gas detection installations on request such as LNG

vessel, FPSO:s, Drill ships etc. These systems will be tailor made for its application.

Note: Custom made centrals is available on request

Individual modules for custom made centrals

These standard systems are available in the following different variations

1 x Control panel, Internal

1 x Isolated serial interface RS485 (NMEA 0183, MODBUS RTU)

5-15 x Relay outputs (one for fault and one for gas A1, 3-13pcs programmable relays)

4-12 x 4-20mA inputs for connection of gas detectors

0-1 x Serial interface RS485/RS422

0-1 x Serial interface RS232

1 x 2,5A or 4,2A Power supply, 100-240VAC

For detailed information see datasheet.

Salwico Gas Detection System