Installation manual
49
Salwico Gas Detection System
The NS-ES/IP66 is a low prole Banshee MT siren for all Salwico Safety systems for
installation in harsh enviroments (IP66). The siren is delivered with cable glands for
cable diameters raging from 8 to 13mm. The base has two knockout holes for the cable
glands. A sounder selector for user selectable tones and a volume control is tted inside
the sounder.
N1525
NS-ES, electronic siren, 24VDC, IP66, red.
DB3V is a lightweight, ameproof sounder intended for use in potentially explosive
atmospheres. DB3 has been designed with high ingress protection to withstand harsh
environmental conditions. The ame paths, are and body are manufactured completely
from UV stable glass reinforced polyester. Stainless steel screws and sinter are incorpo-
rated thus ensuring a corrosion free product. DB3V has a pre-programmed bell-tone
and integral volume control. DB3V is delivered without cable glands. DB3 fulls the fol-
lowing requirements: • Eexde IIC T5 • ATEX, Ex II 2GD • BASEEFA certied. DB3V
is also available in GOST “R” & “K”, Chinese (CQST), Australian (SAA) and UL models.
6255
Siren, Ex-proof, EExd, 24 VDC
The pneumatic alarm typhoons in the KTV and MKTV series are a maintenance free,
light, rigid and powerful signalling apparatus for different applications on-board
ships. The typhoons can be delivered as a complete unit or the horn and the solenoid
valve as separate units (see separate datasheet). For distinct signals, the piping
length between the valve and the horn should not exceed 6m. The horn is delivered
with wall bracket and lter. For explosive, corrosive or very hot areas the solenoid
valves shall be mounted separately outside the exposed area. The solenoid valve is de-
livered with lter and ttings for copper piping with Ø 10 mm OD. The solenoid valve
should not be placed outdoor without protective cover.
6303
6304
6311
Typhoons
KTV-75/400 typhoon 24 VDC, 400Hz
KTV-75/400 typhoon 230 VAC, 400Hz
MKT-75/400 Typhoon without mag.valv. 400Hz