Installation manual
59
Salwico Monitoring System
The Salwico DP7900 is a dilution probe to be used together with Salwico NOx and
SO2 compact gas analyser system. The DP7900 is with its uniformly heated dilution
block - particularly well suited for use in connection with wet scrubbers and other
applications where the stack gas is wet or has a temperature below acid and/or water
dewpoint. Accuracy of measurement is superior compared to other systems due to the
fact that no component of the sample will disappear as a result of condensation. The
dilution probe is easy mounted for easy dismantling for lter checks and replacement
The Salwico DP7900 can be used in high temperature enviroments up to 1800°C.
550170
DP79100 dilution probe (one for each measuring point)
Mounting Flange for DP7900 DN50 PN10 Stainless Steel ange with a 25mm Swagelok
connector to t the guide tube.
550380
Mounting ange for DP7900 probes (DIN100/ANSI 4” 150Ib)
Probeange gasket for 550380 DN50 PN10
550382
Probeange gasket
The HX110 is a sensor for recording the ambient air humidity and the ambient air
temperature. The range is 0-100% humidity and -20 to +80°C temperature. Gives a
4-20mA signal.
550110
HX110 Humidity and Temp sensor (ambient)