Specifications

LTR50001024, Rev. C
10
This applies to Fitness spas with the 11
kW heater only.
Two electrical services are required to
heat the swim side of the Fitness Spa.
Electrical Installation for 11 kW Heater
Testing the GFCI Breaker
Test the GFCI plug prior to rst use and periodically when the spa is pow-
ered. To test the GFCI plug version, follow these instructions. (Spa should
already be plugged in and operational.)
Press the TEST button on the GFCI. The GFCI will trip and the spa will 1.
stop operating.
Press the RESET button on the GFCI. The GFCI will reset and the spa 2.
will turn back on.
The spa is now safe to use.
If the GFCI trips while the spa is in use, press the RESET button. If the
GFCI does not reset, unplug the spa and call your local Cal Spas dealer for
service. DO NOT USE THE SPA!