Instructions / Assembly

INSTALLATION INSTRUCTION

4. Attach wire way or more wire ways to be connected 6. Plug in.

on the wall by screws provided. 7. Install the recommended bulb.

8. Turn on or off the light at switch.

9. Adjust the arm to have your desired

locations.

1. Unscrew 4 knobs on back plate and separate back

plate from mounting plate.

2. Attach mounting plate on the wall and fix the mounting

plate on the wall with 4 mounting screws provided

with screw driver.

3. Attach the back plate on the mounting plate and fix

the back plate on the mounting plate by rotating 4 knobs

until it it tight.

5.Push power cord inside slot of wire way and recap

the wire way cover by pushing so wire way cover locks

into the wire way.

SAVE THESE INSTRUCTIONS

ADJUSTABLE ARM

WALL

SHADE

POWER SUPPLY

CORD

MOUNTING

SCREWS

MOUNTING

PLATE

KNOB

SWITCH

BACK PLATE SCREW

DRIVER

SCREW DRIVER

BACK

PLATE

WIRE WAY

SCREW

POWER CORD

WALL

WIRE WAY

COVER

POWER CORD