Installation Sheet

ASSEMBLY INSTRUCTIONS
ITEM NO: BO-2871TR-DB BO-2871TR-BS
CAREFULLY UNPACK AND PLACE ALL PARTS
ON A SMOOTH SURFACE.
1. SCREW THE SHADE PART (1) TO POLE (2)
AND TIGHTEN BY SET SCREWS (3). MAKE SURE
THE SWITCH AND LAMPSHADE ARE IN THE SAME
DIRECTION.
2. SCREW POLE (2) TO POLE (4).
3. INSERT POLE (4) TO BASE (5) AND TIGHTEN
THEM WITH THE WASHER AND NUT USING
A SPANNER (6).
4. JOIN DRIVER (8) TO THE FIXTURE (7).
INSERT PLUG INTO AN OUTLET AND ENJOY YOUR LAMP!!
*** PRESS THE PUSH DIMMER SWITCH FOR SOME SECONDS TO DIM THE LIGHT.
*** THIS LED LIGHT PROVIDES LOW MAINTENANCE SERVICE WITH NO BULBS TO CHANGE.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Use 30W Build-in LED bulb
(bulb included)
push dimmer switch
The switch and lampshade
are in the same orientation