Instructions / Assembly

ASSEMBLY INSTRUCTIONS
ITEM NO:FX-3771-1
IMPORTANT SAFETY INSTRUCTIONS:
These instructions are provided for your safety. It is very important that they are read
completely before beginning the installation of your fixture.
DIRECT WIRE FIXTURES:WE STRONGLY RECOMMEND INSTALLATION BY
A LICENSED ELECTRICIAN.
TO ASSEMBLE:
Shut off the main electrical supply at fuse box/circuit breaker.
Remove all parts from carton. Do not throw away any parts as
shown.
1. Install the mounting bracket (A) to junction box with
screw (B).
2. Screw the pole (E) clockwise into socket (G) to tighten.
3. Put the wire of the lighting fixture (D) through the canopy
(F) and adjust the wire (D) to desired length and secure
it with plastic clip (C) and hex screw (G).
4. Put the wire (D) through the bracket (A).
5. Connect the ground wires “ ” to the supply wire “F”.
Cathode wire ”N” in white to the supply wire,Anode wire
Anode wire”L” in black to the supply wire in the junction
box.Install canopy (F) to the bracket by screws (E) .
6. Place shade (J) onto socket (I), Then screw socket ring
(K) clockwise into the shade (J) to tighten.
7. Turn on the power and enjoy
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
USE MAX 40 WATTAGE TYPE A BULB
(NOT INCLUDED)
To clean, wipe the fixture with a soft, dry cloth. Avoid the use of harsh or abrasive
chemicals as they may damage the finish .
“L”
“F”
“N”
A
B
E
G
H
F
C
D
I
J
K

Summary of content (1 pages)