Manualshelf

Operating Manual

ManualsBrandsCALAMP WIRELESS NETWORKS ManualsElectronics900 MHz Broadband Base Station
21222324252627282930
© CalAmp Sentry 4G-900 pico Base Station 20 Administration
4.2 Base Station Identification Information
This information includes the site ID, Base Station location and antenna details.
To define Base Station identification information
1. Click the Admin menu option, the General sub-menu option and then choose Installation
Specific. The Installation Specifics
2. Define the Site ID as defined by the Network Operator and click Apply.
Several Base Station may have the same site ID. Values: [0,1000000]
3. Enter more descriptions on the location of the Base Station:
Choose Installation Description (from the Admin menu, General sub-menus). The
Installation Description pane appears.
Define the fields and click Apply:
o Address of Base Station (up to 30 characters)
o Antenna type: Omni, Directional or Unknown
o Antenna Azimuth in degrees, as configured by the installer: 0 to 359
o Inclination: Vertical inclination of antenna in degrees, as configured by the installer.
Values: [-90,90]
o Contact details: name, telephone ,etc. of service person that can be contacted.