Operating Manual

© CalAmp Sentry 4G-900 pico Base Station 41 QoS Management
The following operation buttons are available:
Apply – used to apply changes to selected classifier
Back – go back to the SF screen (to choose another SF).
3. Click the '+' sign to add a new row.
4. Update the required parameters in the Pane table according to the following descriptions and
click apply to implement the changes for each row.
NOTE: Once the classifier for the SF has been defined, the SF configuration is complete and the SF
can be assigned to the desired SSs.
The following table provides a description of the Classifier types and values. The Type and
Values are the same for Classifier 1 and for Classifier 2.
Field
Description
Index
Read Only. Unique number, assigned by the system after applying the
changes.
Classifier Type
1/2
Type of traffic classifier.
Values:
DSCP Range Mask (DSCP field, providing differentiated services
codepoint.) The DSCP is actually the first six-bits of the TOS (Type of
Service) byte of the IP packet header)
MAC address (Source/Destination);
IP address (Source/Destination);
Port Range (Source/Destination);
IP Protocol (IP header field determining the protocol (TCP/ UDP/…)
Classifier
Value 1/2
The specific traffic-classification value, in accordance to the Classifier
Type 1 field. Below are descriptions and examples of values according to
the classifier type:
For….
(Classifier
Type)
Classifier Value
Description
Classifier Value
Example
Comment
MAC
(src/dest)
MAC/Mask
11:22:33:44:55:66/48
/Mask is optional
IP address
(src/dest)
IP/Mask
192.168.1.1/32
/Mask is optional
Port
Range
(src/dest)
port range
1230-1250