User Manual

Integra-TR User Manual Page | 12
2.3.4 CONFIGURATION
Operating characteristics of the Integra-TR are configured by means of Integra-TR's Field Programming Software. The Field
Programming Software is Windows based and requires a Windows
®
98 or later operating system running the Integra-TR
Field Programming Software for both configuration and adjustment.
2.4 FACTORY REPAIR
CalAmp guarantees that every Integra-TR module will be free from physical defects in material and workmanship for two (2)
years from the date of purchase when used within the limits set forth in the Specifications section of this manual. The
manufacturer's warranty statement for this product is available in Appendix 1. If the product proves defective during this
warranty period, call CalAmp Customer Service to obtain a Return Material Authorization (RMA). BE SURE TO HAVE THE
EQUIPMENT MODEL AND SERIAL NUMBER, AND BILLING AND SHIPPING ADDRESSES ON HAND WHEN CALLING. You may
also request an RMA online at www.calamp.com.
When returning a product, mark the RMA clearly on the outside of the package. Include a complete description of the
problem and the name and telephone number of a contact person. RETURN REQUESTS WILL NOT BE PROCESSED WITHOUT
THIS INFORMATION.
For units in warranty, customers are responsible for shipping charges to CalAmp. For units returned out of warranty,
customers are responsible for all shipping charges. Return shipping instructions are the responsibility of the customer.
CalAmp reserves the right to update its products, software, or documentation without obligation to notify any individual or
entity. Please direct all inquiries to:
CalAmp, 299 Johnson Ave., Ste 110, Waseca, MN 56093 Telephone [phone] or Toll Free 800.992.7774
2.5 PHYSICAL DESCRIPTION
Integra-TR consists of a logic PCB (which includes modem circuitry) and a radio module. Each logic PCB and radio module
are matched together and characterized in the factory to optimize performance as an intelligent unit. The two boards then
slide into the rails of an extruded aluminum case.
DTE connection is made via a front panel connector. Power is applied through a rear panel 4-pin connector which includes
two programmable analog connections usable as inputs or outputs.
The unit is not hermetically sealed and should be mounted in a suitable enclosure when dust and/or a corrosive
atmosphere are anticipated. Physically, there are no external switches or adjustments. All operating parameters are set
using the Field Programming Software.
2.6 DIAGNOSTICS
Integra-TR has sophisticated built-in diagnostics that may be transmitted automatically without interfering with normal
network operation. In addition, commands to generate test transmissions, etc., may be issued either locally or remotely.
Diagnostic information takes one of two forms:
Online Diagnostics - Information is automatically sent by each unit at the beginning of every data transmission.