User's Manual

Page | 22
4 INTEGRA-TR FIELD PROGRAMMING SOFTWARE
The Integra-TR Field Programming Software is the programming and diagnostics software for the Integra-TR wireless
modem. The Field Programming Software allows the user to edit and program user programmable settings, interactively
tune modem and RF parameters, and monitor diagnostic data from the Integra-TR.
Integra Field Programming Software is available on the Start-Up Disc shipped with this device. You may also visit the
Download Library available from the Support Menu at www.calamp.com for the most current FPS Version available.
To use the FPS, you will need a PC with Windows 98 or later and at least one operational COM Port available.
4.1 INTEGRA-TR PROGRAMMER WINDOW
Firmware updates:
The Integra-TR firmware resides in flash EPROM and is designed to allow field updates. Updates are done using a PC
connected to the Integra-TR but do not require opening the unit. Updates should be coordinated by the Technical Service
team.
4.2 FILE MENU
From the primary Programmer screen, the File Menu offers the following options:
 Open Data File