User's Manual

Page | 49
4.4.7 DIAGNOSTIC IDS AND ALARMS
From the Programmer Window, Select Utilities – Diagnostics IDs and Alarms
The Diagnostics IDs and Alarms screen allows the user to set up the ID List for use with the Offline Link Test, and Offline and
Online Diagnostics as well as Alarms for use with Online Diagnostics.
Figure 34: Diagnostic IDs and Alarms Screen
4.4.7.1 ID ENTRY AND LIST
 ID Entry
Allows the user to add Short IDs to the ID List. The range of this field is 1 to 1023 (ID 255 is reserved). A Short ID is
added to the ID list by hitting Enter or by pressing the Add ID button.
 ID List
Allows the user to select a Short ID from the list to delete. A Short ID is deleted from the list by pressing the Delete
ID button.
 IP Address
Allows the user to receive diagnostics through a serial to Ethernet converter with this IP Address. Default allows
the user to select a default unit for the diagnostics when received through a serial to Ethernet converter.
4.4.7.2 ALARMS FOR ONLINE DIAGNOSTICS
Alarm indications are available with Online Diagnostics. When Online Diagnostics are received and a diagnostic field falls
outside the Alarm limits, a “<“ character will designate a value less than the low Alarm and a “>” character will designate a
value greater than the High Alarm (See Figure 34).