User Manual

001-5006-000_FCC.docx Page 40
Figure 2-17 Offline Diagnostics Screen
Network Statistics
Offline Network Statistics are only available when the „Online Diagnostics‟ option is enabled for the
network. Online Diagnostics are located on the Setup Modem/Radio Parameters screen. When enabled,
diagnostic information is inserted at the beginning of each transmission from each unit in the network.
While the network may remain online, the monitoring unit is in „Setup‟ mode (flashing green LED).
2-24
001-4006-101
Network Statistics include:
Remote
The Remote drop down allows the user to select (from the list Remotes) which network statistics to
display.
ID Truncated
ID Truncated shows the user the Long and Short ID are not the same.
RSSI Level
The RSSI level shows the current RSSI level (in dBm) while the Local unit is receiving.
Temperature
Temperature shows the internal case temperature (in Celsius).
Battery Voltage
Battery Voltage shows the supply voltage (in Volts).
Forward Power
Forward Power shows forward power (in Watts).
Reverse Power
Reverse Power shows reverse power (in Watts).
RSSI Panel
The RSSI panel shows the current RSSI level (in dBm) while the local unit is receiving.
Modem Select
Local ID
The Local ID button allows the user to send commands to the local unit (the unit interfaced to the
computer). The Short ID for this unit is shown.