User's Manual

120 20194-102 Paragon3 – 700/800MHz User Manual

4.7.3.5 Setup (Advanced) ► IP addressing modes

Figure 29 - Advanced IP Configuration – IP addressing modes

Item Description

Base address Broadcast address associated to base unit

Directed Broadcast

Disabled, Enabled (Default) – Controls forwarding of Di-

rected Broadcast packets

Broadcast

Limited Enable

Disabled (Default), Enabled – Controls forwarding of Lim-

ited broadcast packets

Multicast

Disabled (Default), Enabled – Controls forwarding of Multi-

cast packets (based on the “Multicast Address List”)

Outbound unit address Multicast address associated to remote unit

Multicast Address List Control –

Add / Delete Address

Select the Add button and type in the dialog box the new

address to be added to the “Multicast Address List”. Valid

range of Multicast IP addresses is 224.0.0.1 to

239.255.255.255

Select the Delete button and type in the dialog box the ad-

dress to be deleted from the “Multicast Address List”

Multicast

Multicast Address List

Read-only listing. Dynamic window expands downward as

needed to show all addresses in the list.

When an IP packet is received on the Ethernet side of the

unit and the destination IP address matches one of the

multicast IP addresses in this list, it is forwarded over the

RF interface.

Remote units will send it over their Ethernet interface.