User's Manual

001-2019-500 Rev 0 Paragon4 – UHF, 700 & 800MHz User Manual

Note 1: TB1 connector labeling differs from the actual backplane:

TB1 / Web page name(s) TB1 / Backplane name

Power amplifier power

supply

+13V8_PA

Alarm A1 input AL_A1

Alarm A2 input AL_A2

Alarm B1 input AL_B1

Alarm B2 input AL_B2

Analog monitoring 1 AN1

Analog monitoring 2 AN2

6.7 Setup (Basic)

6.7.1 Setup (Basic) ► General

Used to set four basic operating fields on the connected unit.

Figure 19 - Setup (Basic) – General Setup

Item Description

Station Name

Station name identifier – Enter string up to forty characters in length (letters and/or

numbers)

System ID

Factory default ID is zero. To prevent collision and to minimize interference from re-

mote systems that may be present on the same frequency, Dataradio recommends

changing the System ID to some other value unique to each network.

Upper limit is 255

CWID Call sign

Historically called “Continuous wave ID” – Way of sending FCC license ID using

Morse code

CWID Interval

Interval between CWID messages in minutes

Zero = never.

Preliminary