User's Manual

1-14

Part No. 001-4008-101/102

If a simplex radio network is used (i.e. a single frequency for

all stations), we recommend that the master Integra-TR be set

to “master”, the remotes to “remote” and all units to

“selective” data delivery. This will prevent remote stations

from hearing each other's responses.

For full duplex configuration, set the receiving unit Rx/Tx

Mode to Rx Only (using the Field Programming Software).

Set the transmitting unit mode to Tx Only

Figure 1-6 Point-Multipoint System (Full-duplex)

Figure 1-7 Point-Multipoint System (Full-duplex Repeater)

remote

Master

(

half-du

lex

)

Full-duplex

repeater

Duplexer

remote

RX TX

Y Cabl

730 03350-00x

Duplexer

Master

(full-duplex)

Fan