Manualshelf

User's Manual

ManualsBrandsCalAmp ManualsElectronicsLocation Messaging Unit
12345678910
Application Note
Version:
1.0
Feature: Bluetooth Support
Page #:
7 of 11
6:PEG Serial --
7:VBUS --
8:GPS Rcvr 5:GPS 115200 8/N/1
9:AltMdm 1:Aux2 115200 8/N/1
10:HostApp0 --
11:HostApp1 --
12:HostApp2 --
13:Undef. --
14:BlueTooth 1:Aux2 115200 8/N/1
15:Undef. --
16:Undef. --
17:Undef. --
18:Undef. --
19:Undef. --
OK
AUX2 must only have one stream assigned to it, so the AltMdm stream must be
moved:
at$app param 3072,9,3
This command will move the AltMdm stream to the daughterboard port.
at$app param 3072,9,255 will disable it.
Finally reset the LMU by executing: at$app reboot
3.5 BTCS version format.
Upon RESET BTCS firmware reports its version as follows:
BT: Rcv: VERSION,4.1.1.1CBA8C2A9539 with format: dcs.bts.ver.macaddr , where dcs is
Device chipset version, bts is the bluetopia stack id, ver is BTCS firmware vesrion and
macaddr is the local device MAC address.
3.6 BTCS default Pass key.
The default Pass Key is “0000”.
3.7 Verification of LMU BTST SPP mode “Data” state example.
LMU debug log will contain:
BT: Rcv: SPP,0,1
BT: Connected
From this point data exchange is possible.