User's Manual

o <inbound port>:
This is the current UDP port the LMU will use to deliver its LM Direct™ data. This value should match
UDP port you are using on your LM Direct™ server. It is typically 20500.
o <Inbound Protocol (LMD/LMX)>:
This is the current UDP/IP messaging protocol in use by the LMU. In general it should be LMD.
Example GSM Response
APP:081 8.3d
COM:0
GPS:No Time Sync
INP:11100111 13.7V
MID:4141000100 ESN
INB:207.7.101.227:20500 LMD
5 License Agreement
FOR SOFTWARE, APPLICATION PROGRAMING INTERFACES (APIs) & DOCUMENTATION
IMPORTANT: DO NOT INSTALL OR USE THE SOFTWARE OR DOCUMENTATION UNTIL YOU HAVE
READ AND AGREED TO THIS LICENSE AGREEMENT.
This is a legal agreement between you, the Customer, and CalAmp DataCom Incorporated
(“CalAmp”). By installing and/or using the software or documentation, you are consenting to the terms
of this License. If you do not agree to the terms of this non-exclusive License Agreement, DO NOT
INSTALL OR USE THE SOFTWARE, APIs OR DOCUMENTATION. For a full refund, return the
unused media package and all accompanying materials within seven (7) days to CalAmp. Where
there is no packaging or media, use of the software and/or documentation constitutes
acceptance.
Definitions: As used in this License Agreement, “Software” means CalAmp’s LM Direct ™, LMU
Manager™, LapTop Locator™, LMU Application/Programmable Event Generator™, CDMA LMU
Provisioning Tool, GPRS LMU Provisioning Tool, iDEN™ Provisioning Tool, LMU Status, Clone
Config, Hex Dump, LM Exchange™ Traffic Monitor, Freewave Base Station Config, Remote Serial
Port, App Watcher Service and/or other software products licensed by CalAmp for use in computer
applications development or integration including the computer programs, libraries and related