Installation Guide

Page
COMPANY CONFIDENTIAL: CalAmp reserves all rights to these documents and any information contained therein.
Reproduction, use or disclosure to third parties without express permission is strictly prohibited. ©2019 CalAmp 22 of 36
LMU3040LVB Hardware & Installation Guide

APP: o
<App ID>:
The Application ID value of the LMU indicating the host platform and the wireless networking technology of the
LMU.
o <Firmware Version>:
The current firmware version in use by the LMU

COM:
o <RSSI>:
This is the signal strength the wireless modem sees from the network. In general the LMU is at least scanning
for the network if the RSSI is not -113.
o [./d/D]:
If the character ‘D’ is present, it indicates the LMU had a data session established when it responded to the
status request. For the 8-Bit product line an upper case ‘D’ indicates both the Inbound and Maintenance
sockets are ready. The lower case ‘d’ indicates that only the Maintenance socket is ready. A ‘.’ indicates no
sockets are ready.
o [./a/A]:
This field indicates if the LMU has received an Acknowledgement from the Inbound server. This field will be
empty if the LMU has never received an ACK. The lower case ‘a’ will be present if it has received an ACK since
the last cold boot (i.e. power cycle) but not the last warm boot (App Restart or Sleep). The upper case ‘A’ will
be present if the LMU has received an ACK since the last warm boot. A ‘.’ Indicates no acknowledgement has
been received.
o [./L]:
This field indicates if the LMU’s log is currently active. An ‘L’ indicates that the log is currently in use (i.e. one or
more records have been stored) where a ‘.’ indicates the log is inactive.
o [IP Address]:
This is an optional field if and is only present if the LMU has established a valid data session. This field will
contain the current IP address of the LMU as assigned by the wireless network. Note that if you see a value of
192.168.0.0, this is an indication that the LMU has not been able to establish a data session.
o [<APN>]