Installation Guide

Page
COMPANY CONFIDENTIAL: CalAmp reserves all rights to these documents and any information contained therein.
Reproduction, use or disclosure to third parties without express permission is strictly prohibited. ©2019 CalAmp 34 of 36
LMU3040LVB Hardware & Installation Guide
8 Regulatory Information
Human Exposure Compliance Statement
Pursuant to 47 CFR § 24.52 of the FCC Rules and Regulations, personal communications services (PCS)
equipment is subject to the radio frequency radiation exposure requirements specified in § 1.1307(b), § 2.1091
and § 2.1093, as appropriate.
CalAmp DataCom Inc. certifies that it has determined that the LMU3040LVB™ complies with the RF hazard
requirements applicable to broadband PCS equipment operating under the authority of 47 CFR Part 24,
Subpart E of the FCC Rules and Regulations. This determination is dependent upon installation, operation and
use of the equipment in accordance with all instructions provided.
The LMU3040LVB™ is designed for and intended to be used in fixed and mobile applications. “Fixed” means
that the device is physically secured at one location and is not able to be easily moved to another location.
“Mobile” means that the device is designed to be used in other than fixed locations and generally in such a
way that a separation distance of at least 20 cm is normally maintained between the transmitter’s antenna and
the body of the user or nearby persons. The LMU3040LVB™ is not designed for or intended to be used in
mobile applications (within 20 cm of the body of the user) and such uses are strictly prohibited.
To ensure that the LMU3040LVB™ complies with current FCC regulations limiting both maximum RF output
power and human exposure to radio frequency radiation, a separation distance of at least 20 cm must be
maintained between the unit’s antenna and the body of the user and any nearby persons at all times and in all
applications and uses. Additionally, in mobile applications, maximum antenna gain must not exceed 3.2 dBi.
FCC Rules and Industry Canada (IC) regulatory information
Compliance Statement (Part 15.19)
The equipment device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept any
interference received including interference that may cause undesired operation.
Warning (Part 15.21)
Changes or modifications not expressly approved by TransCore Amtech Systems could void the user’s
authority to operate the equipment. Manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment.