User's Manual

5.4.1 Comm Verification

Installers should first verify that the 4530™ has been acquired and has registered to the wireless

network. This may be verified in one of two ways. First, installers may look at the Comm LED (i.e., the

one closest to the SMC antenna connector). If this LED is solid, then the LMU has registered to the

network and established a data session.

If the LED is not visible, then Comm may be verified using an AT Command:

ATIC

Depending on the wireless network being used something similar to what is shown below will be

displayed. It is important to verify that 'Yes' values are displayed at the top for Data and Network

registration and the correct APN is displayed.

Radio Access : GSM

Network Reg. : Yes, Home

Data Reg. : Yes, Home

Connection : Yes

RSSI : -97 dBm

BER : 99

Channel : 737

Cell ID : 3441

Base Station ID : 40

Local Area Code : 31003

Network Code : 410

Country Code : 310

IMEI (Modem S/N): 351802055396182

IMSI (SIM ID) : 310410202524377

ICC-ID (SIM S/N): 89014102212025243778

Phone Number :

GPRS APN : ISP.CINGULAR

Maint. Server : maint.vehicle-

location.com(216.177.93.246):20500

Inbound Server : (0.0.0.0):20500

Dual Comm : routing id=0, log cid=0, modem type=21, inbnd

index=0