User Manual Feature: SCI_BLE Support Version Page # CalAmp SCI_BLE User Manual FCC ID: APV-SC1204 IC ID: 5843C-SC1204 1 1.
Author Francis Regan Francis Regan Version 1.0 1.
Contents Introduction .................................................................................................................................................. 4 Description .................................................................................................................................................... 4 Regulatory Information.................................................................................................................................
Introduction This application note documents the use of the SCI_BLE chip in the SC1204 tracking device. The SCI_BLE is based off the nRF51822 chip which is a general purpose, ultra-low power SoC ideally suited for Bluetooth® Low Energy and 2.4 GHz proprietary wireless applications. It is built around the 32-bit ARM® Cortex™-M0 CPU with 256/128 KB flash and 32/16 KB RAM. The flexible 2.4 GHz radio supports Bluetooth Low Energy and 2.4 GHz proprietary protocols.
be maintained between the unit’s antenna and the body of the user and any nearby persons at all times and in all applications and uses. Additionally, in mobile applications, maximum antenna gain must not exceed 2 dBi. FCC Rules and Industry Canada (IC) regulatory information Labeling Requirements The SC1204 will have the following listed on a label on the unit: Contains FCC ID: APV-SC1204 Contains IC: 5843C-SC1204 Compliance Statement (Part 15.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
