Product Manual

BATTERY 
• The LDM 165-BT is powered by a rechargeable
Lithium-ion battery (included).
• The battery status icon on the display shows
remaining power.
• Connect included USB cable to charging block
and LDM 165-BT, then plug into outlet.
• Approximate charging time: 5 hours (full charge)
MEASURING CONDITIONS
The quality of the measurement depends on the
surfaces to which you are measuring.
• Strongly reecting targets deect the laser beam
and cause measuring errors.
• Non-reecting, dark surfaces increase the
measuring time.
• Always begin by taking a controlled measurement.
USING THE LASER DIMENSION MASTER 165-BT
Buttons
Power On/Measure: Press once
to turn power on. While unit is on, press
once to turn laser on, press again to
measure (beeps once). To save battery
power, the laser shuts o󰀨 automatically
after 30 seconds of non-use. The device
turns o󰀨 after 10 minutes of inactivity.
3 — LDM 165-BT
On
C/Off
Func
UG3360E-B.indd 3 9/7/2017 7:13:51 AM