Product Manual

 — 4
Behavior depends on which mode the device
is in, as specied below.
• Linear, Area, Volume measurement modes: used
to add and subtract measurements
• Bluetooth selection mode: used to turn Bluetooth
on or o󰀨
• Reference Point mode: used to change the
measurement Reference Point to either top/front-
end or bottom/back-end of the device. Flashing
upper-left indicator reects current setting.
• Memory mode: used to scroll forward and
backward through the last 50 measurements
• Units mode: used to scroll forward and backward
through available units of measurement
Repeated presses scroll through the Measuring
modes, Reference Point mode, Memory mode and
Units mode.
Enters Bluetooth selection mode, allowing you to
turn Bluetooth on or o󰀨.
Press and release to clear the most recent
measurement. Selecting during a cleared display
returns to Linear Measurement mode. Press and hold
for 2 seconds to turn device o󰀨.
UG3360E-B.indd 4 9/7/2017 7:13:51 AM