Product Manual

7 — LDM 165-BT
Icon Description
Length measurement expected
Width measurement expected
Area calculation complete (non-blinking)
Volume Mode
Press until the Volume icon
appears. With laser on, press
to measure Length.
Then, measure Width and Height to calculate Volume.
The entire cube will be outlined in red when the
calculation is complete. The Volume will display at the
bottom of the screen.
Icon Description
Length measurement expected
Width measurement expected
Height measurement expected
Volume calculation complete (non-blinking)
Basic Indirect Height
Press until the Basic
Indirect Height icon appears. With laser on, press
to measure the Diagonal and its corresponding Angle*
to calculate the Height. The Height will be outlined in
red when the calculation is complete and will display at
the bottom of the screen.
Icon Description
Diagonal* measurement expected
Height calculation complete (non-blinking)
*Angle must appear on display when taking Diagonal measurement
to prevent a calculation error.
UG3360E-B.indd 7 9/7/2017 7:13:52 AM