Reference Guide Manual

 (repeats options) FRAC 0 1/16 INCH
Second press of  :
(Areadisplays) AREA Std.
 AREA 0. SQ FEET
 AREA 0. SQ INCH
 AREA 0. SQ M
 (repeats options) Std.
Third press of  :
(Volumedisplays) VOL Std.
 VOL 0. CU FEET
 VOL 0. CU M
 (repeats options) VOL Std.
Fourth press of  :
(Meterlineardisplays) METR 0.000 M
 (oating point) METR FLOAt M
 (repeats options) METR 0.000 M
Fifth press of  :
(Decimaldegreedisplays) DEG 0.00º
 (oating point) DEG FLOAt
 (repeats options) DEG 0.00º
Sixth press of  :
(Fractionalmode) FRAC Std.
 (Lowest denominator) FRAC COnSt.
(oating point)
 (Repeats options) FRAC Std.
Seventh press of  :
(MathematicalOperation) MATH OrdEr
4095 Inside_Corrected.indd 14 4/27/2009 8:42:57 AM