Reference Guide Manual

5. ExitTapefunctionandcontinue:
 * TTL= 22 FEET 0 INCH
 22 FEET 0 INCH
2   24 FEET 0 INCH
*Displaystotalbeforeexiting.
calcUlaTe cosTs
The Cost function provides the total cost of
material, based on a stored unit cost and an
entered quantity of material. This is conve-
nient for quickly calculating costs on a job that
requires many of the same kind of items.
Example
Youaredoinganinstallationthatincludes120
feetofpipethatcomesin10'lengthsat$3.21
per10'pipe.
KEYSTROKES DISPLAY
Storetheunitcostofthepipesneeded:
  0.
      COST Per 3.21
Enterthenumberrequired:
  12
Calculatetotalcost:
  (Cost) TTL$ 38.52
You can then quickly calculate costs for a dif-
ferent number of the same item.
Po c k e t Re f e R e n c e Gu i d e — 25
4095 Inside_Corrected.indd 23 4/27/2009 8:42:58 AM