Manual

100 — CONSTRUCTION MASTER



PRO

LT (#4030)

To Set “Fractional Resolution”:

[Conv] [Stor] (Prefs) (1st press of [Stor]) FRAC 0-1/16 INCH

[+] (plus sign) FRAC 0-1/32 INCH

[+] FRAC 0-1/64 INCH

[+] FRAC 0-1/2 INCH

[+] FRAC 0-1/4 INCH

[+] FRAC 0-1/8 INCH

To Set Rake Wall Stud Sizes to “Descending” or “Ascending”:

[Stor] (2nd press of [Stor]) RAKE dESCEnd

[+] (plus sign) RAKE ASCEnd

To Set “Area” Answer Format:

[Stor] (3rd press of [Stor]) AREA Std.

[+] (plus sign) AREA 0. SQ FEET

[+] AREA 0. SQ YD

[+] AREA 0. SQ M

To Set “Volume” Answer Format:

[Stor] (4th press of [Stor]) VOL Std.

[+] (plus sign) VOL 0. CU YD

[+] VOL 0. CU FEET

[+] VOL 0. CU M

To Set Fraction Resolution to “Standard” or “Constant”:

[Stor] (5th press of [Stor]) FRAC Std.

[+] (plus sign) FRAC ConSt

To Set “Exponential Mode” On or Off:

[Stor] (6th press of [Stor]) EXP OFF

[+] (plus sign) EXP On

To Set “Meter” Linear Decimal Format:

[Stor] (7th press of [Stor]) METR 0.000 M

[+] (plus sign) METR 0. M

þþ Note: Press [On/C] at any time to exit the Preference Mode.