Manual

User's Guide — 103
Trig Plus III (#4075)
To Set “Fractional Resolution”:
[Conv] [Stor] (Prefs) (1st press of [Stor]) FRAC 0-1/64 INCH
[+] (plus sign) FRAC 0-1/2 INCH
[+] FRAC 0-1/4 INCH
[+] FRAC 0-1/8 INCH
[+] FRAC 0-1/16 INCH
[+] FRAC 0-1/32 INCH
To Set “Area” Answer Format:
[Stor] (2nd press of [Stor]) AREA Std.
[+] (plus sign) AREA 0. SQ FEET
[+] AREA 0. SQ YD
[+] AREA 0. SQ M
To Set “Volume” Answer Format:
[Stor] (3rd press of [Stor]) VOL Std.
[+] (plus sign) VOL 0. CU YD
[+] VOL 0. CU FEET
[+] VOL 0. CU M
To Set Rake Wall Stud Sizes to “Descending” or “Ascending”:
[Stor] (4th press of [Stor]) RAKE dESCEnd
[+] (plus sign) RAKE ASCEnd
To Set Jack Rafter to “Descending” or “Ascending”:
[Stor] (5th press of [Stor]) JACK dESCEnd
[+] (plus sign) JACK ASCEnd
To Set Regular/Irregular “Jack Spacing”:
[Stor] (6th press of [Stor]) IRJK OC-OC
[+] (plus sign) IRJK JAC-JAC
To Set Fraction Resolution to “Standard” or “Constant”:
[Stor] (7th press of [Stor]) FRAC Std.
[+] (plus sign) FRAC ConSt
(Cont’d)