Manual

10 — CONSTRUCTION MASTER

PRO
Convert [Conv] Key—Unit Conversions and Second
Functions
The [Conv] key is to convert between measurement units or to
access second functions, listed below:
[Conv] — Convert
Used with the measurement keys to convert between units or with
other keys to access special functions.
[Conv] [ x ] — All Clear
Clears all values, including Memory. Resets all permanent settings
to defaults.
þþ Note: Use only when necessary, as it deletes all stored values.
[Conv] [%] — x
2
Squares the value in the display. For example, to square the value
10, enter 10 then [Conv] [%].
[Conv] [uu ] — Square Root Function (√ )
Used to find the square root of a non-dimensional or area value (e.g.,
100 [Conv] [uu ] = 10).
[Conv] [ / ] — x10
x
Allows entry of an exponent. For example, 8 [Conv] [/] 14 is 8 times
10 to the 14th power.
[Conv] [ ÷ ] — 1/x
Finds the reciprocal of a number (e.g., 8 [Conv] [÷] = 0.125).
[Conv] [ – ] — Change (+ / –) Sign
Toggles the sign of the displayed value to plus or minus.
[Conv] [ + ] — Pi (ππ)
Constant = 3.141593
[Conv] [ •• ] — Degrees: Minutes: Seconds
Converts between D:M:S and decimal degree formats.