User Guide

Pocket RefeRence Guide — 7
Ço
(Off) —
Turns calculator off and
clears the memory register.
s=
Memory Store (M+) —
replaces
stored memory value with the
displayed value.
Measurement Unit Keys
m
Enters or converts to metres.
M
Millimetres —
Enters or converts
to millimetres.
Ç7
Centimetres (cm) —
Enters
or converts to centimetres. For
example, to enter 50 centimetres,
input 50Ç7 .
f
Feet —
Enters or converts to feet
as whole or decimal numbers. Also
used with the i and / keys
for entering Feet-Inch-Fraction
values (e.g., 6f9i1/2 ).
Repeated presses during
conversions swap between Feet-
Inch-Fractions and Decimal Feet.
i
Inch —
Enters or converts to
inches. Entry can be whole or
decimal number. Also used with
the / key for entering fractional
inch values (e.g., 9i1/2 ).
Repeated presses during
conversions swap between
Fractional and Decimal Inches.
/
Fraction Bar —
Used to enter
fractions (e.g., 1-1/2 inches is
entered 1i1/2 ). Note: You
need to assign the “whole” inch
value (e.g., 1i ) rst using the
i key, then enter the fraction
(
1/2 ). However, if you are
only entering fractions of an inch,
you don’t need to assign it, the
calculator knows it is a fractional
inch if you use the
/ key—e.g.,
enter 1/8 of an inch by pressing
1/8 . Fractions can be entered
as proper (1/2, 1/8, 1/16) or
improper (3/2, 9/8).
Ç9
Yards (Yds) —
Enters or converts
to yards. For example, to enter 50
yards, input 50Ç9 .
(contʼd)