User Guide

Pocket RefeRence Guide — 11
(contʼd)
sp
Coverage —
Stores a new Paint
Coverage per Litre (see grid,
“Default/Standard Values for
Materials,” for current setting). To
recall your setting, press rp .
w
Wallpaper —
Calculates number
of rolls of wallpaper, based on
an entered area and a stored
Wallpaper Roll Coverage Area.
sw
Stores a new Coverage Area per
Wallpaper Roll. To recall
this setting, press rw .
t
Tile — Finds the number of tiles, based
on an entered length or area. Repeated
presses will scroll between numbers
of tiles based on various Standard Tile
Sizes (see “Default/ Standard Values for
Materials”).
Note: In the calculation, the
corresponding tile size will show in the
upper right of the display. Tile sizes
are labeled in millimetres, not square
millimetres (or sq. metres). In other words,
a “100mm tile” is really 100mm x 100mm
or a 10,000 square-mm (0.01 sq. m) size.
Note:
Calculation does not account for
grout width, so you will need to adjust
for this. Also note that this key cannot be
customized; you must use Custom Tile
Keys
Ç6 if you are using other than
the stored tile sizes.
F
Flooring —
Calculates carpet
length required in metres based on
entered area and Standard Carpet
Roll Sizes (see “Default/Standard
Values for Materials”). Repeated
presses of F will scroll between
standard roll sizes.
Note: this key cannot be customized.
b
Bricks —
Calculates the number of
standard “face” bricks and “paver”
bricks based on an entered length,
area or volume and the Standard
Brick Sizes. Repeated presses
of b will swap back and forth
between the number of “face” and
“paver” bricks, and the entered
dimensional value. Note: this key
cannot be customized.
(contʼd)