User Guide

Pocket RefeRence Guide — 13
(contʼd)
Ç4
8 x 4 Sheets —
Calculates
number of plywood/drywall sheets
based on an entered linear distance
or area and Standard Sheet Sizes
(see “Default/Standard Values for
Materials”).
Note: this key cannot be customized
Ç5
Bulk Bags —
Calculates number
of bags of gravel or sand based on
an entered volume and a stored
Bulk Bag Size.
s5
Stores Bulk Bag Size —
Stores
a new Bag Size.
Note: You must enter or nd the bag’s
cubic volume rst. Use length x width
x height, then
s5 . To recall this
setting, press r5.
Ç6
Custom Tile —
Calculates
number of tiles based on an entered
area and a stored Custom Tile Size.
This is used separately from the
regular t key, which has various
Standard Tile Sizes built in.
Note: Calculation does not account for
grout width for custom tiles, so you will
need to adjust for this.
s6
Stores Custom Tile Size —
Stores Custom Tile Size. You must
enter or nd the tile size area rst.
Use length x width, then s6 . To
recall this setting, press r6 .
Ç1
Slabs —
Calculates the number of
slabs of concrete required, based
on an entered length or area and
Standard Slab Sizes.
Note: this key cannot be customized.
Ç2
Studs —
Calculates number of
studs, based on an entered linear
distance and a stored On-Centre
Spacing.
Note: Automatically adds one stud to
the calculated answer to account for
one on the end.
s2
Studs —
Stores a new On-Centre
Spacing for studs in metres. To
recall this setting, press r2 .
Ç3
Blocks —
Calculates the number
of blocks based on an entered
linear distance or area and a stored
Standard Block Area.