Manual

U SER ’ S G UIDE — 5
Weight Keys
Ç 1 Kilograms (kg) — Enters or converts (a weight or vol-
ume value) to Kilograms . A dimensioned volume will
convert using the stored Weight per Volume value.
Ç 3 Metric Tons (met tons) — Enters or converts (a
weight or volume value) to Metric Tons . A dimen-
sioned volume will convert using the stored Weight
per Volume value.
Ç 4 Pounds (lbs) — Enters or converts (a weight or vol-
ume value) to Pounds . A dimensioned volume will
convert using the stored Weight per Volume value.
Ç 6 Tons (tons) — Enters or converts (a weight or vol-
ume value) to Tons . A dimensioned volume will con-
vert using the stored Weight per Volume value.
ß 0 Store Weight per Volume (wt/vol) — Stores a new
Weight per Volume value as Tons per Cubic Yard or
other format, as listed below:
Note: After entering a value and pressing ß 0 , continue
pressing the 0 digit key until you’ve reached the desired weight
per volume format. To recall your setting, press ® 0 .
• Ton Per CU YD
• LB Per CU YD
• LB Per CU FEET
• MET Ton Per CU M
• kG Per CU M
This value is permanently stored until you change it
or perform a Clear All (Ç x).