USER GUIDE For more information visit www.caldigit.
Table of Contents Section 1 : General Information Introduction General Use Warnings Safety Warnings System Requirements In the Box TS3 Plus Diagram 3 3 3 4 4 5 Section 2 : Using the TS3 Plus Powering the TS3 Plus Connecting the TS3 Plus LED Indicator Using the TS3 Plus Utility Interfaces Summary Thunderbolt™ 3 USB 3.2 Type-A DisplayPort 1.
1. General Information Introduction The CalDigit Thunderbolt™ Station 3 Plus maximizes the potential of Thunderbolt™ 3’s 40G/s throughout to add a plethora of devices to any Mac or PC Thunderbolt™ 3 enabled computer. Featuring dual Thunderbolt™ 3 Type-C ports for daisy-chaining extra Thunderbolt™ 3 devices, the TS3 Plus can fit into any workflow without sacrificing a Thunderbolt™ 3 port all while charging your computer up to 87W.
System Requirements Thunderbolt™ 3 computers macOS 10.12 Sierra or later Windows 7, 8, 10 or later In the Box A • 1 x CalDigit TS3 Plus B • 1 x Power Supply C • 1 x Power Cord (plug style may vary based on regional regulations and requirements.
TS3 Plus Diagram USB 3.2 Type-A SD Card Reader USB 3.2 Type-C Audio In/Out Digital Optical USB 3.2 Type-C Gigabit Ethernet DC In USB 3.
USB 3.2 USB 3.2 USB 3.2 6 USB 3.
2. Using the TS3 Plus Powering the TS3 Plus 1. The CalDigit TS3 Plus requires power from the AC adapter to operate. Connect the AC adapter connector to the DC jack on the back of the TS3 Plus and the other side to an AC outlet. 2. To power off the TS3 Plus, disconnect the power cable from the AC outlet.
NOTE Always use the supplied Thunderbolt™ 3 cable or a certified 40Gb/s Thunderbolt™ 3 cable. Connecting the TS3 Plus to your computer Once the TS3 Plus has been powered on, connect the device using a Thunderbolt™ 3 cable from one of the Thunderbolt™ 3 port labeled “Computer” on the TS3 Plus to a Thunderbolt™ 3 port on your computer. This single connection will now provide 87W charging for your laptop in addition to expanding your connectivity options.
CalDigit Docking Station Utility The CalDigit Docking Station Utility makes it incredibly easy to disconnect all your USB storage devices from the TS3 Plus without the need to manually disconnect them one by one. NOTE The CalDigit Docking Station Utility Installer file needs to be downloaded and installed on your Mac from the CalDigit website. Please go to www.caldigit. com/support.asp to download the Installer package. Disconnecting all USB storage devices 1.
Interface Summary Thunderbolt™ 3 The TS3 Plus features two Thunderbolt™ 3 Type-C ports that can transfer at speeds up to 40Gb/s. One port is reserved for the connection to your host computer and the second can be used to connect extra Thunderbolt™ 3 devices. Thunderbolt™ 3 Type-C supports video and data. The Thunderbolt™ host port also provides charging up to 87W for your computer. USB 3.2 Type-C The TS3 Plus features two USB 3.2 Type-C ports (1 x 5Gb/s, 1 x 10Gb/s).
DisplayPort The TS3 Plus features a full-size DisplayPort that supports a maximum resolution up to 4K. DisplayPort can be easily converted to HDMI, miniDisplayPort, VGA, and DVI with the use of adapter cables or adapters. Note: The DisplayPort on the TS3+ is only compatible with active DisplayPort adapters. If you attempt to use a passive adapter, your display will not function correctly.
Single Monitor: Connected to Thunderbolt™ 3 Port (With use of a USB-C Video Adapter connected to the Thunderbolt™ 3 port) Resolution Video Display Frequency Single Monitor 5K 60 Hz Yes 4K 60 Hz Yes 2K (2560 x 1600) 60 Hz Yes Full HD (1920 x 1080p) 60 Hz Yes 2K (2560 x 1600) 30 Hz Yes Full HD (1920 x 1080p) 30 Hz Yes Connecting Dual Monitors You can add two external monitors to the TS3 Plus both at up to 4K@60Hz. Alternatively you can connect one single 5K@60Hz monitor.
Ethernet The TS3 Plus has a single Gigabit Ethernet port to connect to a Gigabit Ethernet network. Your computer will connect to whichever network is connected to the TS3 Plus by default. These settings can be changed in the “Network” section under “System Preferences”. The Ethernet port also supports wake-on-LAN which allows your computer to wake from standby remotely via the network. Audio The TS3 Plus has one 3.5mm audio input and one 3.5mm amplified audio output.
CalDigit TS3 Plus Specifications Package Dimension and Weight • Height : 5.15 inches (131.0 mm) • Width : 1.57 inches (40.0 mm) • Depth : 3.87 inches (98.44 mm) • Weight: 1.04 lbs (0.47 kgs) Interface • 2 x Thunderbolt™ 3 • 1 x DisplayPort 1.2 • 5 x USB 3.2 Type-A (5Gbps) • 1 x USB 3.2 Type-C (5Gbps) • 1 x USB 3.2 Type-C (10Gbps) • 1 x SD Card Reader (SD 4.0 UHS-II) • 1 x Digital Optical Audio (S/PDIF) • 1 x Gigabit Ethernet • 1 x 3.5mm Analog Audio In • 1 x 3.
CalDigit TS3 Plus Accessories Thunderbolt™ 3 Cables • Thunderbolt™ 3 Cable 0.5m (40Gb/s) • Thunderbolt™ 3 Cable 1m (40Gb/s) • Thunderbolt™ 3 Cable 2m (40Gb/s) Power Supply • CalDigit TS3Plus-180W AC Adapter PSU USB-C Video Adapters • CalDigit USB-C to DisplayPort adapter • CalDigit USB-C to HDMI adapter • CalDigit USB-C to VGA adapter Please contact CalDigit or an authorized CalDigit reseller for availability and pricing.
3. Technical Support and Warranty Information Technical Support If you run into any issues while using your TS3 Plus, please contact CalDigit Technical Support. • Email: support@caldigit.com • Phone: (714) 572-6668 • Website: www.caldigit.com/support.asp When contacting CalDigit Technical Support, make sure to be at your computer and have the following information available: 1. Your TS3 Plus serial number 2. Operating system and version 3. Computer make and model 4.